1033509B-2/12
a
Push and hold the red button.
Thread strap through
underside and out the
front of RipCord lock.
Basic operation:
Loop RipCord strap under far side of
crossbar. Bring strap over load, and
under near side of crossbar.
Pull strap end to tighten Ripcord down.
Gather extra strap and secure it.
Install second rip cord.
If your vehicle has an adjustable crossbar
system, you must use the maximum possible
crossbar spread when carrying long loads.
Do not move your Q-Towers!
To Next Page
Loading...
