Yakima Swing Daddy 4 - Loading and Securing Bikes; Extend and Position Carrier Arms; Cradle Positioning and Bike Loading; Secure Bikes with Straps

1033439G-3/15

interference.

LOAD REMAINING BIKES.
Extend arms.
LOAD LARGEST OR
HEAVIEST BIKE
FIRST.
Pull straps tightly over frame, hook into place.
Stabilize
the bike
frame in
the cradle.
Arrange
bikes for best
stabilization.

bike with chain



RAISE ARMS COMPLETELY.
Arms will lock into position.
Pull the lever toward you,
and lift the arms.
The straps can
be routed under
the brake cables.
CRADLE POSITIONING
To slide cradles along the carrier
arms, stabilizer must be in upright
position.
Close cradles while loading bikes.
CAUTION
Keep fingers away from
ALL moving parts!
Attach one rubber strap to each
cradle and stabilizer.
stabilizer