YAKOTEC MS-S3 - RS232 Communication Port; Status Indicator; Button X4

R
www.yankong.com MS-S3 V2.1 User Manual
8 03/06/2019
outputting
18
B+
Encoder B channel positive
outputting
32
B-
Encoder B channel negative
outputting
34
Z+
Encoder Z channel positive
outputting
35
Z-
Encoder Z channel negative
outputting
39
PZOut
Encoder Z channel
single-ended output
Encoder Z
channel
single-ended
output (output
signal)
In order to avoid some wrong actions and deviations, PU, DR and MF should meet
certain requirements, as shown in the following figure:
4.2.4 RS232 communication port
Reserved
4.2.5 Status Indicator
MS-S3 has a 6-digit LED to display the status. When the drive fails, the drive will
stop and show corresponding fault code; the drive will save the latest fault in the
EEPROM of the drive according to the queue form, and the drive can save up to 10 latest
history failure.
4.2.6 Button X4
There are four touch buttons on the MS-S3 button display panel to implement the
functions of up, down, shift/cancel and confirm. For details, see Chapter 5: Menu
Operation.