R
www.yankong.com MS-S3 V2.1 User Manual
5 03/06/2019
3 Installation
3.1 Installation Size
Back Side
Installation dimension drawing (unit: mm)
3.2 Installation Method
Install the drive with the upright side installation to create a strong air convection on
the surface of the heat sink; if necessary, install a fan near the drive to force heat
dissipation to ensure that the drive works within a reliable operating temperature range
(The reliable operating temperature of the drive is usually within 60 ° C and the motor
operating temperature is within 80 ° C).
To Next Page
Loading...