Yale 8800 Series

Copyright ©2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited
For technical support contact Yale
®
at 800.438.1951 x5033 or support@yalelocks.com
5
Installation Instructions
8800 Series
Mortise Lock
80-8800-0016-000 12/20
5 Installation, continued
4
Install Levers
Figure 8
Figure 9
Figure 10
1. Insert outside mounting plate through
door and lock body, and hold. (Figure 8)
2. Align and fasten inside mounting plate
securely with two (2) #8-32 x 1-1/4"
screws.
3. Install roses on inside and outside
adapter plates.
5
Install Indicator Mounting Plate
6
Install Indicator Assembly
1. Screw indicator mounting plate to door with four
(4) #6 x 3/8" sheet metal screws. (Figure 9)
2. If indicators are being used on both sides of door,
repeat step 5.1 for opposite side.
1. Verify lock is in unlocked state (turn outside
lever to confirm).
2. Verify indicator is in vacant/unlocked position.
3. Assemble indicator assembly onto mounting
plate. (Figure 10)
4. Secure indicator assembly to door with two (2)
machine screws.
• Use #832 x 5/8" screw for top
• Use #832 x 3/8" screw for bottom
5. If indicators are being used on both sides of
door, repeat steps 6.1 through 6.3 for opposite
side.
NOTE: Torx security screws recommended.
Outside
of door
Inside of door
Inside of door
Outside of door
Inside lever
Rose
RH door
shown
Set Screw
#832 x 11/4"
Screws
Inside MountingPlate
Outside Mounting Plate
Mounting
Plate
#6 x 3/8" Screws
Indicator
Assembly
#832 x 5/8"
Screw
4. If included, press rose adapter into rose and
mounting plate assemblies.
5. Unscrew inside spindle 1/2 turn and align
ramp in the horizontal position.
6. Slide plastic bushing onto outside lever and
spindle and insert through the lockbody.
7. Slide plastic bushing onto inside lever and
attach to spindle. Then tighten inside lever
set screw.
Rose
Plastic Bushing
Rose Adapter
Rose Adapter
Plastic Bushing
Outside Lever and Spindle
#832 x 3/8"
Screw