Yale EBOSS E5400LN series

8
4. Push connector thru
1” Dia Hole and Slide
Keypad against door.
5. Attach Controller Board Ass’y with Thru Bolt.
See Next Page for attaching Wiring Harness.
III-B. INSTALL ELECTRONIC COMPONENTS
SECTION III INSTALL LOCKSET (CONTINUED)
CONTROLLER BOARD
ASSEMBLY
1” DIA.
HOLE
REMOVE
BEFORE
USE
Wire to pass thru
hole in Rose Plate
3. Installing Inside Trim
Install
Grounding Strip
THRU BOLT