(!!— or
—▸) to exit
SET DAYLIGHT SAVING TIME MENU
A Supervisor or a Service Technician can use this submenu to enable or disable the use of daylight saving
time on trucks and set it up to make automatic time changes. When this feature is enabled (set to On), the
system time clock increases by one hour at 2:00 am on the selected Start Date and decreases by one hour at
the same time on the selected End Date. Figure 40 shows the title screen for this menu.
Figure 40. Set Daylight Saving Time Menu
To enable daylight saving time, press the Enter Key at the menu shown in Figure 40.
The system will display the screen shown in Figure 41.
1.
DAYLIGHT SAVINGS ENABLE
2.
ENABLE INDICATOR (THE ON SETTING IS UP)
3.
DAYLIGHT SAVINGS START MONTH SETTING
4.
START DAY INDICATOR
To Next Page
Loading...
Need help?
General
