•
Impact Monitor Shutdown
•
Motor Braking
The following sections describe the Truck Setup submenus.
ADD/REMOVE PASSWORD
NOTE: This menu selection is available to logged in Supervisors and Service Technicians.
This submenu, shown in Figure 50, allows Supervisors and Service Technicians to add or remove passwords.
See the Password Screen topic in the Password Screen section for more information.
BATTERY SETTINGS
NOTE: This submenu is available to logged in Service Technicians and Supervisors. It is visible only
on trucks equipped with the Lithium-Ion Ready option.
This menu provides settings for battery type installed on the truck.
There are two possible battery settings, lead-acid and lithium-ion battery. See Figure 51.
1.
LEAD-ACID BATTERY SETTING
2.
LITHIUM-ION BATTERY SETTING
Figure 51. Battery Settings
It is important that the setting match the battery type installed to allow for accurate function of the battery
discharge indicator and Shutdown Warning System.
RESTORE DEFAULT SETTINGS
NOTE: This submenu is available on all trucks to logged in Supervisors and Service Technicians.
This menu allows a Supervisor or a Service Technician to change all adjustable truck settings back to their
factory default settings. Calibrations are NOT reset when this function is used. Figure 52 shows the Restore
Defaults screen.
To Next Page
Loading...
Need help?
General
