Essential Se
ries
2 3
Essential Series
YDME - 50
YDME - 50
2. Lock Installation
2.1 Install the latch
3.1 Locate the strike plate
3.3 Install the plastic slot and strike plate
3.2 Open the hole on the door
frame with a chisel
2.5 Fix the back
cover
2.2 Install the
front lock body
2.3 Install the
back lock body
2.4 Install batteries
(4X1.5V)
3. Strike Plate Installation
Match the strike plate on the latch properly by your
hand as the above picture shows. Try closing the door
and mark the position of the strike plate on the door frame
To Next Page
Loading...
