Table 2. How to Read Calibration Procedure (Continued)
A. TYPICAL DISPLAY WITHOUT KEY,
WITH OPTIONS
B. TYPICAL DISPLAY WITH KEY,
WITHOUT OPTIONS
1. SYMBOLS USED IN CALIBRATION
PROCEDURES
2. NUMBERS FOR SERVICE PASSWORD ENTRY -
SEE PROC_CAL_001
Step 1: Press * One Time
You will see:
Passwords
Enter Password
Step 2: Press * One Time
You will see:
Enter Password
Calibration steps.
Information Information to assist in completion of calibration procedure.
NOTE: Perform all actions and calibration steps in the order shown.
8000 YRM 1134 Description
Confidential/Proprietary - Do Not Copy or Duplicate 3
To Next Page
Loading...
Need help?
General
