Proc_Cal_001: Service Password Entry
WHEN TO PERFORM
Performed when any service menu-related items must
be performed.
WHY PERFORM
Service-related items are protected from inadvertent
access. This procedure allows the service menus to
be accessed.
HOW TO PERFORM
WARNING
Keep yourself and all others clear of the lift mech-
anism. Never allow anyone under or on the forks.
Never put hands, arms, head, or legs through the
mast or near the carriage or lift chains. This warn-
ing applies not only to the operator but also the
helper. A helper must not be near the load or the
lift mechanism while the operator is attempting to
handle a load. The lift mechanism has moving
parts with close clearances that can cause seri-
ous injury.
Refer to Table 3 for the procedures on how to perform
Pro_Cal_001: Service Password Entry.
Table 3. Proc_Cal_001: Service Password Entry
A. TYPICAL DISPLAY WITHOUT KEY, WITH OPTIONS
B. TYPICAL DISPLAY WITH KEY, WITHOUT OPTIONS
NOTE: The password entry can only be done with the ignition ON and the engine OFF. If the engine is started,
and then turned OFF, the password will have to be re-entered.
Action: Ignition ON/EngineOFF
Step 1: Press * One Time.
You Will See: Main Menu
Passwords
Step 2: Press * One Time.
You Will See: Passwords
Enter Password
Step 3: Press * One Time.
You Will See: Enter Password
Information: Refer to Number Location on Keypad and Enter Service Password (Default Service Password is
55555).
Step 4: Press * One Time.
You Will See: Passwords or Main Menu
Enter Password
Proc_Cal_001: Service Password Entry 8000 YRM 1134
4 Confidential/Proprietary - Do Not Copy or Duplicate
To Next Page
Loading...
Need help?
General
