Resetting
Lock
to
Factory
Default
When lock is reset
to
factory defaults all user
codes (including the Master PIN code*) are
deleted and all programming features are reset
to
original default settings (see below).
1. Remove the battery cover and batteries.
2. Remove the interior escutcheon
to
access
the reset button.
3. The reset button (see image at right) is
located beside the PCB cable connector.
4. While pressing the reset button (minimum
of
3 seconds) reinstall batteries. Release reset
button.
5. Replace battery cover.
Upon reset, Master PIN Code creation is the
only option available and must
be
performed
prior
to
any other programming
of
the lock.
Factory
Settings
Settings
Master
PIN
Code
Automatic
Re-lock
Inside
Indicator
Light
One
Touch
Locking
Privacy
Button
Setting
Audio
Mode
Lockout
Mode
Automatic
Re-lock
Time
Wrong
Code
Entry
Limit
Shutdown
Time
Interior Escutcheon
Factory
Setting
Registration
required*
Disabled
Disabled
(Off)
Enabled
Disabled
Enabled
Disabled
30
Seconds
5
Times
60
Seconds
*The
Master
PIN
code
must
be
registered
prior
to
any
other
programming
of
the
lock.
To Next Page
Loading...
