Yale YRC216 - Page 27

27
P/N - - - Rev BYRL EMICL PBINSTL FUL
Changing Lock: Replacing Cylinder
1. To remove cylinder:
A. Remove keypad from door.
B. Remove rubber gasket.
C. Remove two screws holding plastic guide in place.
D. Remove plastic guide.
E. Remove screw with washer holding cylinder in place (visible
after removing plastic guide).
F. Remove cylinder housing by pulling cylinder tailpiece away
from keypad.
2. To Install new cylinder:
A. Reverse previous steps for removing cylinder.
A
B
C
D
F
E