E
3-8
EMU01776
BREAKING IN ENGINE
Your new engine requires a period of
break-in to allow mating surfaces of mov-
ing parts to wear in evenly. Correct break-
in will help ensure proper performance
and longer engine life.
cC
8 Failure to follow the break-in procedure
could result in reduced engine life or
even severe engine damage.
8 Premix fuel must be used during break-
in, in addition to oil in the oil injection
system.
EMF52010
Gasoline (Petrol)/ Engine oil mixing chart
cC
Make sure to mix gasoline (petrol) and oil
completely, otherwise your outboard
motor may be damaged.
Mixing
ratio
50 : 1
Gasoline
(Petrol)
1 L
(0.26 US gal,
0.22 Imp gal)
12 L
(3.2 US gal,
2.6 Imp gal)
14 L
(3.7 US gal,
3.1 Imp gal)
24 L
(6.3 US gal,
5.3 Imp gal)
0.02 L
(0.02 US qt,
0.02 Imp ql)
0.24 L
(0.25 US qt,
0.21 Imp qt)
0.28 L
(0.30 US qt,
0.25 Imp qt)
0.48 L
(0.51 US qt,
0.42 Imp qt)
Engine oil
Break-in time: 10 hours
Gasoline to engine oil premix ratio
during break-in: 50:1
6H3-9-1N 3 2/6/03 11:19 Page 9
To Next Page
Loading...
