Yamaha AEX500 User Manual

1.019K-441 Printed in Japan ’01.09
AEX-500NS
SERVICE MANUAL
EG
011590
ELECTRIC GUITAR
HAMAMATSU, JAPAN
CONTENTS
OVERALL ASSEMBLY ............................................... 2
ELECTRICAL PARTS ............................................. 4
CIRCUIT BOARD ............................................ 5
CIRCUIT DIAGRAM .................................................... 5
WIRING ....................................................................... 6
SPECIFICATIONS .................................................... 6
This document is printed on chlorine free (ECF) paper with soy ink.
WARNING : CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/
electronic and/or plastic (Where applicable) components may also contain traces of chemicals
found by the California Health and Welfare Agency (and possibly other entities) to cause cancer
and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR
MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not
inhale solder fumes or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product,
wash your hands before handling food.
20010910-60000

Yamaha AEX500 Specifications

Fingerboard

fingerboard material	Rose
fingerboard width at 0-F	45.0 mm
fingerboard width at 12-F	54.5 mm
number of frets	20

Neck

neck material	Maple
neck thickness at 1-F	20.9 mm
neck thickness at 12-F	23.1 mm

Weight and Dimensions

scale length	648 mm
length	1011 mm
width	365 mm
net weight	3.0 kg
body depth	43.9 mm