Yamaha AG100FA - Throttle, Cables, and Chassis Checks

FOR YOUR SAFETY – PRE-OPERATION CHECKS
5-2
1
2
3
4
5
6
7
8
9
Throttle grip
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip free play and lubricate
cable and grip housing.
7-12, 7-21
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
7-21
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
7-19, 7-20
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
7-13, 7-15
Shift pedal
• Make sure that operation is smooth.
• Correct if necessary.
7-17
Brake pedal
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
7-23
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
7-22
Sidestands
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
7-23
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Battery
• Check fluid level.
• Fill with distilled water if necessary.
7-25
ITEM CHECKS PAGE
3HA-9-25.book 2 ページ ２０１０年１１月１０日 水曜日 午前９時４８分