EasyManuals Logo

Yamaha AW2400 User Manual

Yamaha AW2400
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #129 background imageLoading...
Page #129 background image
Audio track operations
129
AW2400 Owner’s Manual
Track operations and editing
15
1
Call the TRACK screen View page.
2
Move the cursor to the TRACK field, and
use the [DATA/JOG] dial or the [INC]/[DEC]
keys to select the number of the track you
want to mute.
3
Move the cursor to the MUTE button and
press the [ENTER] key.
Muting will be switched on/off.
If a track is muted, the MUTE symbol changes to “.”
When you press the [ENTER] key once again, muting
will be defeated and the MUTE symbol will change to
“.
1
Call the TRACK screen Virtual TR page by
either pressing the Work Navigate section
[TRACK] key as many times as necessary,
or by pressing the [F2] key after pressing
the [TRACK] key.
This page contains the following items.
1 Virtual tracks
Indicates the status of virtual tracks 1–8. The virtual
track that is currently selected for each track is indi-
cated by a “” symbol. Of the virtual tracks that are
currently not selected, those that have been recorded
are indicated by “ ”, and those that have not yet been
recorded are indicated as “–”.
B Virtual track name
This indicates the name of the virtual track selected by
the cursor. This will indicate “-NO REC-” for tracks
on which nothing has been recorded.
C Tracks
Indicates the track number 1–24.
2
Use the cursor keys to select the virtual
track number that you want to assign to the
desired track.
3
Press the [ENTER] key.
The “” symbol will be displayed at the position of
the newly-selected virtual track. This virtual track will
now be used for recording/playback.
Muting a specific audio track
This mute function switches muting on or off for the recorder
track playback. This also affects the number of simultaneous
playback tracks in the recorder section (
p. 128). It’s a good
idea to mute all unused tracks.
Since 24-bit songs allow a maximum of 12 playback tracks,
mute cannot be disengaged for tracks 13-24.
In some cases, depending on the number of tracks that are in
record-ready mode, you won’t be able to un-mute a track. In
this case, decrease the number of tracks that are in record-
ready mode, and then un-mute the desired track.
HINT
Switching the virtual track of
an audio track
B
C
A
When the AW2400 is in its default state, virtual track 1 is
selected for every track.
HINT
•To switch the virtual track of the stereo track, use the TRACK
screen Stereo TR page.
HINT

Table of Contents

Other manuals for Yamaha AW2400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha AW2400 and is the answer not in the manual?

Yamaha AW2400 Specifications

General IconGeneral
BrandYamaha
ModelAW2400
CategoryMusical Instrument
LanguageEnglish

Related product manuals