EasyManua.ls Logo

Yamaha BLASTER YFS200W - Page 39

Yamaha BLASTER YFS200W
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-2
1
2
3
4
5
6
7
8
9
10
11
Rear brake
●
Check operation. If soft or spongy, have Yamaha dealer bleed
hydraulic system.
●
Check brake pads for wear, and replace if necessary.
●
Check brake fluid level in reservoir, and add recommended brake
fluid to specified level if necessary.
●
Check hydraulic system for leakage. Correct if necessary.
5-4, 8-23, 8-24, 8-26
Clutch
●
Check operation, and correct if necessary.
●
Lubricate cable if necessary.
●
Check lever free play, and adjust if necessary.
8-29
Throttle lever
●
Make sure that operation is smooth. Lubricate cable and lever hous-
ing if necessary.
●
Check cable free play, and adjust if necessary.
5-5, 8-22
Control cables
●
Make sure that operation is smooth. Lubricate if necessary. 8-33
Drive chain
●
Check chain slack, and adjust if necessary.
●
Check chain condition. Lubricate if necessary.
5-5, 8-30, 8-32
Wheels and tires
●
Check wheel condition, and replace if damaged.
●
Check tire condition and tread depth. Replace if necessary.
●
Check air pressure. Correct if necessary.
5-6, 5-7, 5-8
Brake and shift pedals
●
Make sure that operation is smooth. Lubricate pedal pivoting points
if necessary.
8-34
Brake and clutch levers
●
Make sure that operation is smooth. Lubricate lever pivoting points
if necessary.
8-34
Chassis fasteners
●
Make sure that all nuts, bolts and screws are properly tightened. 5-8
Instruments, lights and
switches
●
Check operation, and correct if necessary. 5-8
ITEM ROUTINE PAGE

Table of Contents