8-18
1
2
3
4
5
6
7
8
9
10
11
4. Loosen the clamp screw on each side of the
carburetor, and then remove the carburetor.
5. Remove the securing plate by removing the
screw.
6. Remove the mixing chamber cap by unscrew-
ing it.
7. Disconnect the throttle cable from the throttle
valve by removing the holder screws and
holder.
1. Fuel hose
2. Oil hose
1
2
1. Clamp screw
2. Mixing chamber cap securing plate
3. Screw
4. Mixing chamber cap
1
4
2
3
1
To Next Page
Loading...
