CD-1330
The MCS-1330 consists of the R-1330, CD-1330 and NS-BP400.
This service manual is for the CD-1330.
For service manual of the R-1330 and NS-BP400, please refer to the following publication number:
MCS-1330 は、R-1330、CD-1330 および NS-BP400 で構成されています。
このサービスマニュアルは CD-1330 用です。
R-1330、NS-BP400 用のサービスマニュアルは下記管理ナンバーを参照してください。
101130
SERVICE MANUAL
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifi cally YAMAHA Products, are already known
and understood by the users, and have therefore not been restated.
WARNING:
Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specifi ed. For these reasons, we advise
all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or
the appointed service representative.
IMPORTANT:
The presentation or sale of this manual to any individual or fi rm does not constitute authorization, certifi cation or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifi cations are subject to change without notice or obligation to retrofi t. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING:
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT:
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
■ CONTENTS
TO SERVICE PERSONNEL ........................................2–4
PREVENTION OF ELECTROSTATIC DISCHARGE ......5
SYSTEM COMPOSITION /
システム構成
.......................6
FRONT PANEL ...............................................................6
REAR PANELS ...........................................................7–8
SPECIFICATIONS /
参考仕様
.........................................9
INTERNAL VIEW .......................................................... 10
DISASSEMBLY PROCEDURES /
分解手順
........... 11–13
TEST MODE /
テストモード
................................... 14–15
UPDATING FIRMWARE /
ファームウェアの書き込み
..................................... 16–20
DISPLAY DATA .............................................................21
IC DATA ...................................................................22–27
PIN CONNECTION DIAGRAMS .............................28–29
BLOCK DIAGRAM ........................................................31
PRINTED CIRCUIT BOARDS .................................32–38
SCHEMATIC DIAGRAMS .......................................39–41
REPLACEMENT PARTS LIST ................................43–53
REMOTE CONTROL .....................................................54
animate '08.11
P.O.Box 1, Hamamatsu, Japan
Copyright © 2008 All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
CD-1330
CD PLAYER
MICRO COMPONENT SYSTEM
MCS-1330
R-1330/NS-BP400: 101127
R-1330/NS-BP400: 101127
To Next Page
Need help?
General
