What to do if my Yamaha Stereo Receiver does not work normally?
If your Yamaha Stereo Receiver is not working normally, unplug the AC power cord from the wall outlet, and then plug it in again after about one minute.
How to fix Yamaha Stereo Receiver when it cannot select preset stations?
If you cannot select preset stations on your Yamaha Stereo Receiver, reprogram memory presets.
What to do if Yamaha Stereo Receiver play does not begin?
If play does not begin on your Yamaha Stereo Receiver, check the disc carefully and replace it if necessary. Wait 20 to 30 minutes after switching the unit ON before trying to play a disc. Reload the disc with the label side facing up. Clean the disc.
General| Type | CD Player |
|---|---|
| Disc Capacity | 1 |
| Disc formats | CD, CD-R, CD-RW |
| Channels | 2 (Stereo) |
| Frequency Response | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio | 105 dB |
| Dynamic Range | 96 dB |
| Total Harmonic Distortion | 0.003% |
| Digital Outputs | Optical |
| Power Consumption | 10 W |
| Output Voltage | 2.0 V |
| Line output | 1 |
| Weight | 3.5 kg |
To Next Page
