RX-V1600/DSP-AX1600
57
RX-V1600/
DSP-AX1600
27. ROM VER/SUM
The version and checksum are displayed. The signal is
processed using EFFECT OFF. The checksum is
obtained by adding the data at every 8 bits for each
program area and expressing the result as a 4-figure
hexadecimal data.
27.ROMVER/SUM
プログラムのバージョン、チェックサムを表示します。
信号はエフェクトOFFです。チェックサムは、プログラ
ムエリア別にデータを8ビットごとに加算していき、4
桁の16進データで現したものです。
MAIN VERSION
The version of MAIN (IC301 FUNCTION P.C.B.) firmware is displayed.
MAIN(IC301FUNCTIONP.C.B.)のファームウェアのバージョンを表示します。
MAIN SUM
The checksum of MAIN (IC301 FUNCTION P.C.B.) is displayed.
MAIN(IC301FUNCTIONP.C.B.)のチェックサムを表示します。
A: All area P: Program area
VIDEO VERSION
The version of VIDEO (IC501 D-VIDEO P.C.B.) firmware is displayed.
VIDEO(IC501D-VIDEOP.C.B.)のファームウェアのバージョンを表示します。
VIDEO SUM 1
The checksum of VIDEO (IC501 D-VIDEO P.C.B.) is displayed.
VIDEO(IC501D-VIDEOP.C.B.)のチェックサムを表示します。
A: All area C: CDDA boot area
VIDEO SUM 2
The checksum of VIDEO (IC501 D-VIDEO P.C.B.) is displayed.
VIDEO(IC501D-VIDEOP.C.B.)のチェックサムを表示します。
W: Wall paper area (Not applied to this model. /
このモデルには適用されません。)
P: Program area
TI FLASH VERSION
The version of DSP (IC542 DSP P.C.B.) firmware is displayed.
DSP(IC542DSPP.C.B.)のファームウェアのバージョンを表示します。
TI FLASH SUM (4Byte)
The checksum of DSP (IC542 DSP P.C.B.) is displayed.
DSP(IC542DSPP.C.B.)のチェックサムを表示します。
XM VERSION (U, C models)
The version of XM firmware is displayed.
XMのファームウェアのバージョンを表示します。