EasyManua.ls Logo

Yamaha DTXPRESS - 4-4. Reverb Bypass; 5-1. Voice

Yamaha DTXPRESS
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59
4-4. Reverb Bypass
This function decides whether to bypass the system effect’s reverb
or not.
5. MAP (Drum Map) Group
This sub-mode is used to edit the User Drum Map. This mode is
divided into the following 9 pages.
5-1. Voice ................................................................ 59
5-2. Volume, Pan .................................................... 60
5-3. Tuning .............................................................. 60
5-4. Layer Balance.................................................. 60
5-5. Decay, Cutoff Frequency ................................. 60
5-6. Reverb Send.................................................... 60
5-7. Alternate Group, Key Assign Mode ................. 61
5-8. Key Off Enable ................................................ 61
5-9. Map Copy ........................................................ 61
* When a User Drum Kit (No. 49-80) is selected, the User Drum
Map is the data that is used to set the note number’s voice, etc.,
that is not assigned to the drum kit’s pad input. Therefore, when a
preset drum kit is selected the User Drum Map will not be used
(the preset drum map will be used) so settings for functions [5-1]
to [5-8] that appear in the display can not be carried out.
Utility Mode
q ReverbBypass (Reverb Bypass)
off: Does not bypass (functions). Normal operation.
on: Bypasses. Reverb will not be applied to the voice.
UT TG MASTER
ReverbBypass=off
q
Also, settings cannot be carried out for the following functions [5-
1] to [5-8] when the note numbers for the currently selected drum
kit are already assigned/set.
5-1. Voice
This creates a list that assigns a drum voice for each MIDI note
number. Which MIDI note number q will be received and which
drum voice w will be sounded.
UT MAP N= 0C -2
( Preset Map )
UT MAP N= 0C -2
( Drumkit Data )
q N (MIDI Note Number)
[Range] 0-127 (C-2 to G8)
Sets the MIDI note number. Displays the note number and note
name.
*According to the setting of the Utility mode’s [1-1. Learn Mode]
(P. 52) you can appoint the MIDI note number with key on input
from the MIDI IN/TO HOST jacks.
w Voice Category
[Range] K, k, S, s, T, t, C, H, P, E, e, L, m
Selects the drum voice category.
Refer to Drum Kit Voice Edit Mode’s [1-1. Voice] (P. 41).
UT MAP N= 0C -2
=K/000 NoAssign
q
w
e

Table of Contents

Other manuals for Yamaha DTXPRESS

Related product manuals