To Next PageTo Next PageWhat to do if Yamaha Home Theater System does not work?
If your Yamaha Home Theater System is not working, disconnect the power cord from the power outlet for a few minutes, then reconnect it and try again.
Why am I not able to select some items in the setup menu of my Yamaha Home Theater System?
If you cannot select some items in the setup menu of your Yamaha Home Theater System, press STOP twice before selecting the setup menu. Note that some menu items may not be available depending on the disc.
How to fix no power on Yamaha DVX-C310 Home Theater System?
If your Yamaha Home Theater System has no power, ensure the AC power cord is properly connected. If it is, press the STANDBY/ON button on the front panel of the DVD receiver to turn on the power.
What to do if there is no picture on Yamaha DVX-C310 Home Theater System?
If your Yamaha Home Theater System shows no picture, refer to your TV’s manual for correct Video In channel selection and change the TV channel until you see the DVD screen. Also, press DVD/CD on the remote control to switch to DVD/CD mode.
How to improve poor radio reception on Yamaha Home Theater System?
If the radio reception on your Yamaha Home Theater System is poor: * Adjust the antenna or connect an external antenna for better reception if the signal is weak. * Increase the distance between the DVD receiver and your TV or VCR. * Tune in to the correct frequency. * Place the antenna farther away from any equipment that may be causing noise.
Why is the sound too low on one side of my Yamaha DVX-C310?
If the sound is too low on one side of your Yamaha Home Theater System, check if all cables are properly connected.
Why is the disc ejected without an operation on my Yamaha DVX-C310 Home Theater System?
If the disc is ejected without an operation on your Yamaha Home Theater System, make sure that you use a disc supported by the DVD receiver.
Why can't I change the aspect ratio on my Yamaha DVX-C310?
If the aspect ratio of the screen cannot be changed on your Yamaha Home Theater System, it might be because the aspect ratio is fixed on the DVD disc, or, depending on the TV, it may not be possible to change the aspect ratio.
Why can't I play DivX® movies on my Yamaha DVX-C310 Home Theater System?
If you are unable to play DivX® movies on your Yamaha Home Theater System, ensure that the DivX® file was encoded in ‘Home Theater’ mode with a DivX® 5.x encoder.
Why is there no sound from the center, surround speakers, and subwoofer on my Yamaha DVX-C310 Home Theater System?
If there is no sound from the center, surround speakers, and subwoofer of your Yamaha Home Theater System: * Ensure the center, surround speakers, and subwoofer are connected correctly. * Adjust the volume level in the setup menu. * Press the SURR button to select the correct surround sound setting. * Make sure the source you are playing is recorded or broadcast in surround sound (DTS, Dolby Digital, etc.).
General| Brand | Yamaha |
|---|---|
| Model | DVX-C310 |
| Category | Home Theater System |
| Language | English |
Provides critical safety advice for operating the unit.
Information regarding FCC regulations for US customers.
Precautions related to laser exposure and servicing.
Important warnings about fire, electric shock, and battery replacement.
Details the buttons, display, and jacks on the front of the unit.
Describes the input/output terminals on the rear of the unit.
Explains the operation and buttons of the remote control.
Recommended positions and functions of each speaker.
Instructions for placing the center speaker.
Guidance on securely attaching speakers to walls.
Visual guide for connecting speakers to the receiver.
Procedure for connecting speaker wires correctly.
Instructions for starting, stopping, and pausing playback.
Using the receiver's OSD to operate the iPod.
Procedure for navigating and adjusting settings via OSD.
Steps for signing up and basic operations of XM Radio.
Solutions for common issues like no power or picture.
Resolving problems with playback, sound, and speakers.
Solutions for remote control malfunctions.
Troubleshooting radio reception and XM Satellite Radio errors.
