EasyManua.ls Logo

Yamaha EF6300iSDE - Generator Control Functions; Engine Switch Operation; Oil Warning Light Indicator

Yamaha EF6300iSDE
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
763-119
q
w
e
– 8 –
700-7XF
Oil warning light (red)
When the oil level falls below the lower level, the oil
warning light comes on and then the engine stops
automatically. Unless you refill with oil, the engine will
not start again.
TIP
If the engine stalls or does not start, turn the engine
switch to “START”. If the oil warning light comes on,
the engine oil is insufficient. Add oil and restart.
CONTROL FUNCTION
Engine switch
The engine switch controls the ignition system.
1 7 “ON”
Ignition circuit is switched on.
The engine can be started.
2 5 “STOP”
Ignition circuit is switched off.
The engine will not run.
3 6 “START”
Starting circuit is switched on.
The starter motor starts and the engine can be started.
Take your hand off the switch immediately after the
engine starts.
7CK-28199-12_a 11.3.21 13:17 Page 8

Table of Contents