Playing the EZ-TP
14 EZ-TP Owner’s Manual
Select the “0” or “1” setting to match the EZ-TP to the pitch of your voice.
There is generally a difference of about 1 octave between male and female voices.
If the appropriate setting is not made for your voice, the notes you produce may be
either too high or too low, so it is important to make the right selection.
Most female and adolescent voices are best matched by the “1” setting, while the
average male voice is best matched by the “0” setting.
The default EZ-TP setting is “0”.
1
Press the button so that the upper indicator lights.
2
Press the [SET UP] button – the button will light.
3
Press and hold the [SET UP] button, use the [-]/[+] buttons to
select either “1” or “0”.
This setting is retained in memory even when the power is turned off.
This setting can be changed during song playback, but in this case the new
setting won’t be retained in memory when the power is turned off.
Setting the EZ-TP To Match Your Voice
0
12
To Next Page
Loading...
Need help?
General
