What to do if Yamaha F115AET Outboard Motor gauge shows “----”?
If the gauge displays '----', it indicates that the digital signal is not being received. Check that the couplers are securely connected and replace any damaged bus wires or hubs.
What causes Yamaha F115AET Outboard Motor fuel management gauge to show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
How to fix Yamaha F115AET Outboard Motor tachometer showing incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
Why Yamaha F115AET illumination does not light?
If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
What to do if the Yamaha F115AET gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or, if necessary, replace the gauge itself.
Provides instructions for correctly mounting the outboard motor onto the boat transom.
Guides the user on choosing the appropriate propeller based on engine and boat specifications.
Lists specific propeller applications for 2014 models across various engine types and HP ranges.
Describes different types of Yamaha remote controls, including throttle systems and connector types.
Details the features, compatibility, and basic functions of the 703 side mount remote control.
Describes the concealed remote control, its mounting, and features for electric start models.
Details the exclusive binnacle mount DEC remote control, its electrical operation, and applications.
Describes the features and functions of the 6x4 multi-function tiller handle.
Details the tiller handle kit components and specifications for US models.
Details the tiller handle kit components and specifications for Japanese models.
Details the tiller handle kit components and specifications for EU & ANZ models.
Explains the functions, types, applications, dimensions, and setup of the fuel management gauge.
Provides representative wiring diagram samples and wire color codes.
Provides solutions for common issues encountered with digital network gauges.
Illustrates wiring diagrams for single station, twin engine, and quad engine applications.
Specifies recommended battery types, capacities, and ratings for various engine models.
Explains battery wiring, including isolator equipped models and twin engine applications.
Provides a checklist for pre-delivery inspection to enhance customer satisfaction.
General| Compression Ratio | 10.0:1 |
|---|---|
| Fuel Induction System | EFI (Electronic Fuel Injection) |
| Starting System | Electric |
| Lubrication System | Wet Sump |
| Alternator Output | 35 Amp |
| Gear Ratio | 2.15:1 |
| Steering | Remote |
| Exhaust | Through propeller |
| Engine Type | 4-stroke, DOHC, 16-valve |
| Displacement | 1832 cc |
| Ignition System | TCI |
| Recommended Fuel | Regular Unleaded |
| Recommended Oil | Yamalube 4M |
| Engine Management | Yamaha's ECM (Electronic Control Module) |
| Max Output | 115 hp |
| Shaft Length | 20" |
| Full Throttle RPM Range | 5, 000 - 6, 000 RPM |
| Warranty | 3 years |
To Next Page
