Need help?Do you have a question about the Yamaha F150 and is the answer not in the manual?
General| Tweeter | Yes |
|---|---|
| Speaker type | 2-way |
| Number of drivers | - |
| Speaker placement | Floor |
| Audio output channels | 2.0 channels |
| Number of woofer drivers | 2 |
| Number of tweeter drivers | 1 |
| Woofer diameter (imperial) | 6.5 \ |
| Tweeter diameter (imperial) | 1 \ |
| Product color | Black |
| Impedance | 6 Ω |
| Sensitivity | 88 dB |
| Frequency range | 37 - 30000 Hz |
| RMS rated power | 180 W |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 362 mm |
|---|---|
| Width | 200 mm |
| Height | 1030 mm |
| Weight | 11200 g |
General safety precautions to observe when operating the outboard motor.
Instructions on using the engine shut-off cord to prevent runaway boats.
Precautions regarding gasoline flammability and explosion risks.
Prohibition of operating under the influence of alcohol or drugs.
Tips for scanning and operating defensively to avoid collisions.
Technical specifications of the outboard motor.
Details on the motor's physical dimensions and weight.
Recommended fuel types, octane ratings, and oil specifications.
Essential requirements before installing the outboard motor.
Warning about overpowering a boat.
Detailed specifications for suitable batteries.
Guidance on choosing the correct propeller for optimal performance.
Explanation of the start-in-gear protection device.
Recommended engine oil grades and quantities.
Details on recommended gasoline types, octane, and ethanol content.
Labeled diagram identifying major outboard motor components.
Red icons indicating engine abnormalities and pop-up alerts.
What to do if the overheat alert is activated.
What to do if the low oil pressure alert is activated.
What to do if the water separator alert is activated.
What to do if the cooling water pressure alert activates.
Specifics on overheat alerts, including engine speed reduction.
Specifics on low oil pressure alerts, including engine speed reduction.
Procedure for draining water from the separator.
What to do when an engine trouble alert is displayed.
What to do when an engine trouble alert occurs.
Steps to take when the water separator alert activates.
How to drain water from the separator.
Actions for low oil pressure alerts.
Actions for overheat alerts.
How the water separator alert indicator functions.
How the engine trouble alert indicator functions.
How the overheat alert indicator functions.
How the low oil pressure alert indicator functions.
General information about the alert system and warnings.
Alerts related to communication issues with the DEC.
Description of the overheat alert device and its indicators.
Details on low oil pressure alerts.
How low oil pressure alerts are indicated and what to do.
How the water separator alert system activates.
How the water separator alert indicator functions.
General information and warnings about outboard motor installation.
Advice on balancing the boat and mounting location.
How mounting height affects performance and reliability.
Initial steps and procedures for operating the new outboard motor.
Instructions for filling the engine with oil before first use.
Procedure and importance of the engine break-in period.
Detailed steps for the 10-hour engine break-in period.
Essential checks to perform before starting the engine.
Warnings and checks for the fuel system and potential leaks.
How to check the operation of controls like the main switch and steering.
How to check the engine shut-off cord and clip.
Procedure for checking the engine oil level using the dipstick.
Safety warnings and checks for the power trim and tilt system.
How to check the battery's charge and connections.
Detailed procedure for safely filling the fuel tank.
Warnings about exhaust gases and ventilation.
Safety precautions and procedure for starting the engine.
Final checks before starting the engine.
Step-by-step guide to starting the engine.
Checks to perform after the engine has started.
How to check the cooling water flow.
How to check smooth shifting between gears.
Warning about shifting gears safely.
Warnings and methods for stopping the boat safely.
Explanation of trim angle and its effect on performance.
How to adjust the outboard motor's trim angle using the switches.
How to adjust boat trim for optimal performance.
Steps to tilt the outboard motor up.
Steps to tilt the outboard motor down.
How to operate the motor in shallow water.
Safety warnings and procedures for transporting and storing the motor.
Steps for storing the outboard motor properly.
Detailed steps for flushing the cooling system.
Overview of periodic maintenance requirements and warnings.
Table outlining initial and periodic maintenance tasks and intervals.
Additional table of maintenance tasks and intervals.
How to inspect and check the condition of the spark plug.
Warnings and procedures for changing the engine oil.
Recommended procedure for changing engine oil with an oil changer.
Procedure for replacing the engine oil filter.
Safety warnings and procedure for inspecting the propeller.
Warnings and procedures for changing the gear oil.
Correct procedure for connecting the battery cables.
Correct procedure for disconnecting the battery cables.
A guide to diagnosing and resolving common engine problems.
Common causes and solutions for engine power loss.
Warnings and procedures following impact damage to the motor.
Troubleshooting steps when the power trim and tilt unit fails.
Procedure to follow if the water separator alert indicator blinks.
Details of the limited warranty for Yamaha four-stroke outboard motors.
Warranty periods based on type of use (pleasure vs. commercial).
How to get warranty repairs, including use in other countries.
To Next Page
