EasyManua.ls Logo

Yamaha F150 - Cooling Water Check Procedure; Low Oil Pressure Alert Details

Yamaha F150
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruments and indicators
47
Stop the engine immediately and see page
103 of this manual to drain the water from the
fuel filter. Get back to the port soon and con-
sult a Yamaha dealer immediately.
NOTICE
ECM00911
Gasoline mixed with water could cause
damage to the engine.
Low oil pressure alert
If the engine oil pressure drops too low, the
pop -up window will appear.
The engine speed will automatically decrease
to about 2000–3500 r/min.
To return to the normal display
Push the “SET” (set) button, and the low oil
pressure-alert indicator will start to blink.
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert device
is activated. Check the engine oil level and re-
plenish oil if necessary. If the alert device has
activated while the appropriate engine oil lev-
el is maintained, consult your Yamaha dealer.
NOTICE
ECM01602
Do not continue to run the engine if the
low oil pressure alert device has activated.
Serious engine damage will occur.
Overheat alert
If the engine temperature rises too high while
cruising, the pop -up window will appear.
The engine speed will automatically decrease
to about 2000–3500 r/min.
To return to the normal display
Push the “SET” (set) button, and the over-
heat-alert indicator will start to blink.
1. Water separator-alert indicator
1. Pop-up window
1
ZMU08334
1
ZMU08330
1. Low oil pressure-alert indicator
1. Pop-up window
1
ZMU08335
1
ZMU08331
U6DV37E0.book Page 47 Monday, December 10, 2018 4:07 PM
©2020 Yamaha Motor Corporation

Table of Contents

Related product manuals