Need help?Do you have a question about the Yamaha F150D and is the answer not in the manual?
General| Prop Shaft Horsepower | 150 hp |
|---|---|
| Ignition System | TCI (Transistor Controlled Ignition) |
| Lubrication | Wet Sump |
| Starting System | Electric |
| Oil Capacity | 5.3 L |
| Steering | Remote |
| Exhaust | Through Propeller |
| Engine Type | 4-Stroke |
| Max Output | 150 hp |
| Full Throttle RPM Range | 5000 - 6000 rpm |
| Fuel Induction System | EFI (Electronic Fuel Injection) |
| Recommended Fuel | Regular Unleaded |
| Alternator Output | 50 Amp |
| Weight | 231 kg (509 lbs) - L shaft |
| Gear Ratio | 2.00:1 |
| Shaft Length | L = 508 mm (20 in), X = 635 mm (25 in) |
Covers propeller, rotating parts, hot parts, electric shock, power trim/tilt, and shut-off cord safety.
Covers gasoline handling, spills, and carbon monoxide risks.
Covers modifications, alcohol, PFDs, passengers, collisions, weather, and laws.
Explains identification numbers, key number, EC Doc, CE Marking, RCM, ICES, warning labels, and symbols.
Details dimensions, weight, performance, engine, fuel, and oil specifications.
Covers horsepower rating, mounting, and remote control system requirements.
Guidance on selecting the correct battery and propeller for the motor.
Details on counter rotation, start-in-gear protection, and engine oil specifications.
Covers fuel, water conditions, anti-fouling paint, disposal, emergency equipment, and emissions.
Diagram and list of major outboard motor components.
Explains remote control box, lever, switches, and related functions.
Covers trim tab, tilt support, cowling locks, flushing device, and fuel filter.
Details tachometer and trim meter functions and displays.
Explains various alert indicators like low oil, overheat, fuel, battery, engine trouble, and water separator.
Covers speed, fuel, trip, clock, and voltmeter gauges.
Explains fuel management, flow, consumption, and economy meters.
Details the 6YC and 6Y8 multifunction meters and their indicators.
Covers first-time use, oil filling, break-in, and pre-start checks.
Details checks for fuel, cowling, fuel system, controls, and shut-off cord.
Steps for starting, checking, and warming up the engine.
Covers shifting, stopping the boat and engine.
Guides on adjusting trim angle, boat trim, and tilting the motor.
Advice for operating in shallow, salt, or muddy/acidic water.
Precautions for transporting and storing the outboard motor.
Procedures for flushing the cooling system and cleaning the motor.
Outlines periodic maintenance tasks and schedules.
Details maintenance for specific components like greasing, spark plugs, oil, and battery.
Provides Q&A for common engine problems.
Addresses issues like vibration, impact, fuse, trim/tilt, water alerts, and submerged motors.
Information on engine data recording and Yamaha's privacy policy.
To Next Page
