Why doesn't my Yamaha Outboard Motor boat speed gauge show?
If the boat speed and/or coolant pressure gauge isn't showing, it means the optional sensor hasn't been installed. Install the optional sensor to fix this.
What to do if the Yamaha F150AET Outboard Motor gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or, if necessary, replace the gauge itself.
Why Yamaha Outboard Motor illumination does not light?
If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
How to fix Yamaha Outboard Motor tachometer showing incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
What causes Yamaha Outboard Motor fuel management gauge to show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
Why does my Yamaha F150AET Outboard Motor fuel management gauge show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting is probably wrong. Fill the tank with fuel, and then set the correct fuel tank capacity.
What to do if my Yamaha Outboard Motor speedometer shows the incorrect fuel level?
If the speedometer shows an incorrect fuel level, the fuel sensor selection is likely wrong. You should set up the fuel sensor to the correct resistance.
What does it mean when my Yamaha F150AET Outboard Motor gauge shows “----”?
If the gauge shows “----”, it indicates that the digital signal is not being received. Make sure the couplers are securely connected and replace any damaged bus wires or hubs.
Why Yamaha F150AET boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
What causes Yamaha F150AET gauge response to be poor or down?
If the gauge response is poor or down, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Try replacing the unit or removing the heavy signal output unit.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates special precautions that must be taken to avoid damage to the products or other property.
Details the steps for safely removing the outboard motor from its shipping crate.
Provides instructions for correctly mounting the outboard motor onto the boat transom.
Specifies the minimum height for 4-stroke engines to prevent water ingress and ensure performance.
Guidance on setting toe-out distance for optimal twin engine wake alignment.
Critical notifications for the proper installation of the remote oil tank to prevent damage.
Details on various propeller types, including Standard, Reliance, Saltwater, and Performance series.
Guidance on selecting the appropriate propeller based on engine and operating conditions.
Overview of different remote control types (Mechanical, DEC) and their applications.
Details and dimensions for the 703 side mount mechanical remote control.
Wire harnesses specific to digital electronic remote control systems.
Details on the 6X4 multi-function tiller handle, its functions, and kit preparation.
Wiring diagram for tiller handles used in the US market.
Information on fuel management gauges, including types, applications, kits, and wiring.
Representative wiring diagram samples for remote controls and instruments.
Wiring diagram for single engine applications with 6Y9 gauge and 6X6 control.
Wiring diagram for twin engine applications with 6Y9 gauge.
Wiring diagram for triple engine applications with 6Y9 gauge.
Wiring diagram for quad engine applications with 6Y9 gauge for specific models.
Wiring diagram for dual station, single engine applications with 6Y9 gauge.
Wiring diagram for dual station, single engine applications with 6Y8 gauge.
Wiring diagram for dual station, twin engine applications with 6Y9 gauge.
Wiring diagram for dual station, triple engine applications with 6Y9 gauge.
Wiring diagram for dual station, quad engine applications with 6Y9 gauge for specific models.
Recommendations for battery capacity, CCA rating, and selection based on engine models.
Wiring instructions for single and twin engine applications, including isolator equipped models.
Checklist for enhancing customer satisfaction through static and dynamic checks before delivery.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates special precautions that must be taken to avoid damage to the products or other property.
Details the steps for safely removing the outboard motor from its shipping crate.
Provides instructions for correctly mounting the outboard motor onto the boat transom.
Specifies the minimum height for 4-stroke engines to prevent water ingress and ensure performance.
Guidance on setting toe-out distance for optimal twin engine wake alignment.
Critical notifications for the proper installation of the remote oil tank to prevent damage.
Details on various propeller types, including Standard, Reliance, Saltwater, and Performance series.
Guidance on selecting the appropriate propeller based on engine and operating conditions.
Overview of different remote control types (Mechanical, DEC) and their applications.
Details and dimensions for the 703 side mount mechanical remote control.
Wire harnesses specific to digital electronic remote control systems.
Details on the 6X4 multi-function tiller handle, its functions, and kit preparation.
Wiring diagram for tiller handles used in the US market.
Information on fuel management gauges, including types, applications, kits, and wiring.
Representative wiring diagram samples for remote controls and instruments.
Wiring diagram for single engine applications with 6Y9 gauge and 6X6 control.
Wiring diagram for twin engine applications with 6Y9 gauge.
Wiring diagram for triple engine applications with 6Y9 gauge.
Wiring diagram for quad engine applications with 6Y9 gauge for specific models.
Wiring diagram for dual station, single engine applications with 6Y9 gauge.
Wiring diagram for dual station, single engine applications with 6Y8 gauge.
Wiring diagram for dual station, twin engine applications with 6Y9 gauge.
Wiring diagram for dual station, triple engine applications with 6Y9 gauge.
Wiring diagram for dual station, quad engine applications with 6Y9 gauge for specific models.
Recommendations for battery capacity, CCA rating, and selection based on engine models.
Wiring instructions for single and twin engine applications, including isolator equipped models.
Checklist for enhancing customer satisfaction through static and dynamic checks before delivery.
General| Brand | Yamaha |
|---|---|
| Model | F150AET |
| Category | Outboard Motor |
| Language | English |
To Next Page
