Why Yamaha Outboard Motor gauge operates unstably?
If the gauge operates unstably, it could be because a resistor is not connected to the ending hubs. Connect the gray 6-pin cap to the ending multi-hubs.
How to fix Yamaha Outboard Motor trim gauge showing incorrect position?
If the trim gauge shows an incorrect position, the initial position setting might be wrong, or the trim sender could be damaged. Put the motor in the fully trimmed-in position and reset the initial (zero) trim angle. If that doesn't work, replace the trim sender.
Why Yamaha Outboard Motor Speedometer or Comb. Speedometer & Fuel mgt gauge shows incorrect fuel level?
If the speedometer or combination speedometer & fuel management gauge shows an incorrect fuel level, the fuel sensor selection is likely wrong. Set up the fuel sensor to the correct resistance.
What to do if Yamaha F150AET gauge shows “----”?
If the gauge displays '----', it indicates that the digital signal is not being received. Check that the couplers are securely connected and replace any damaged bus wires or hubs.
What causes Yamaha Outboard Motor fuel management gauge to show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
How to fix Yamaha Outboard Motor tachometer showing incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
Why Yamaha Outboard Motor illumination does not light?
If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
What to do if Yamaha Outboard Motor fuel management gauge shows incorrect fuel consumption?
If the fuel management gauge shows incorrect fuel consumption, the engine recognition might be wrong (especially for multi-applications). To fix this, default the engine number and turn the key switch on in order from the portside engine to re-memorize each engine number.
What does it mean when my Yamaha F150AET Outboard Motor gauge shows “----”?
General| Brand | Yamaha |
|---|---|
| Model | F150AET |
| Category | Outboard Motor |
| Language | English |
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates special precautions that must be taken to avoid damage to the products or other property.
Details the steps for safely removing the outboard motor from its shipping crate.
Provides instructions for correctly mounting the outboard motor onto the boat transom.
Specifies the minimum height for 4-stroke engines to prevent water ingress and ensure performance.
Guidance on setting toe-out distance for optimal twin engine wake alignment.
Critical notifications for the proper installation of the remote oil tank to prevent damage.
Details on various propeller types, including Standard, Reliance, Saltwater, and Performance series.
Guidance on selecting the appropriate propeller based on engine and operating conditions.
Overview of different remote control types (Mechanical, DEC) and their applications.
Details and dimensions for the 703 side mount mechanical remote control.
Wire harnesses specific to digital electronic remote control systems.
Details on the 6X4 multi-function tiller handle, its functions, and kit preparation.
Wiring diagram for tiller handles used in the US market.
Information on fuel management gauges, including types, applications, kits, and wiring.
Representative wiring diagram samples for remote controls and instruments.
Wiring diagram for single engine applications with 6Y9 gauge and 6X6 control.
Wiring diagram for twin engine applications with 6Y9 gauge.
Wiring diagram for triple engine applications with 6Y9 gauge.
Wiring diagram for quad engine applications with 6Y9 gauge for specific models.
Wiring diagram for dual station, single engine applications with 6Y9 gauge.
Wiring diagram for dual station, single engine applications with 6Y8 gauge.
Wiring diagram for dual station, twin engine applications with 6Y9 gauge.
Wiring diagram for dual station, triple engine applications with 6Y9 gauge.
Wiring diagram for dual station, quad engine applications with 6Y9 gauge for specific models.
Recommendations for battery capacity, CCA rating, and selection based on engine models.
Wiring instructions for single and twin engine applications, including isolator equipped models.
Checklist for enhancing customer satisfaction through static and dynamic checks before delivery.
To Next Page
