Yamaha F150D - Procedure for Tilting up

Operation
58
NOTICE
ECM00242
 Before tilting the outboard motor, stop
the engine by following the procedure
on page 55. Never tilt the outboard mo-
tor while the engine is running. Severe
damage from overheating can result.
 Do not tilt up the engine by pushing the
tiller handle (if equipped) because this
could break the handle.
EMU42683
Procedure for tilting up
1. Place the remote control lever in neutral.
2. Press the power trim and tilt switch “ ”
(up) until the outboard motor has tilted
up completely.
3. Pull the tilt support lever toward you to
support the engine. WARNING! After
tilting the outboard motor, be sure to
support it with the tilt support knob or
tilt support lever. Otherwise the out-
board motor could fall back down
suddenly if oil in the power trim and tilt
unit or in the power tilt unit loses pres-
N
ZMU01771
N
ZMU07382
1. Power trim and tilt switch
1. Power trim and tilt switch
1. Power trim and tilt switch
ZMU07848
UP
1
ZMU07850
UP
1
1
UP
ZMU07768
U63P7KE0.book Page 58 Wednesday, November 29, 2017 11:06 AM