Why is my Yamaha Outboard Motor gauge operating unstably?
If the gauge operates unstably, it's likely that the resistor isn't connected to the ending hubs. Connect the gray 6-pin cap to the ending multi-hubs to resolve this.
Why is the Yamaha F200B gauge response poor?
If the gauge response is poor, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Replace the faulty unit or remove the heavy signal output unit.
General| Full Throttle RPM Range | 5000 - 6000 RPM |
|---|---|
| Starting System | Electric |
| Recommended Fuel | Regular Unleaded |
| Recommended Oil | Yamalube 4M |
| Steering | Remote |
| Engine Type | 4-Stroke |
| Displacement | 2785 cc |
| Max Output | 200 hp @ 5500 rpm |
| Bore x Stroke | 96 mm x 96.2 mm |
| Fuel Induction System | Electronic Fuel Injection |
| Ignition | TCI |
| Prop Shaft Length | 20" / 25" |
| Alternator Output | 50 amps |
To Next Page
