3-26
GB
EMU00310
PROCEDURE
Manual tilt model
1) Place the gear shift lever in the neu-
tral position.
2) Place the tilt lock lever in the release
position.
3) Slightly tilt up the engine. The tilt-
support bar will lock automatically,
supporting the engine in a partially
raised position.
NOTE:
This motor has 2 positions for shallow
water cruising.
RETURNING TO ORIGINAL POSITION
1) Place the tilt lock lever in the lock
position.
2) Slightly tilt up the engine until the tilt-
support bar automatically returns to
the free position.
3) Then, slowly lower the engine to the
normal position.
402071
N
402074
65W-9-77-3B (E,F,S) 3/19/02 5:21 PM Page 26
To Next Page
Loading...
