Yamaha F90 - Tilt Support Lever for Power Trim and Tilt Model; Cowling Lock Lever; Flushing Device

Components
35
EMU26342
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
NOTICE
ECM00661
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to secure
it in the tilt position.
EMU40762
Cowling lock lever
The cowling lock levers are used to secure
the top cowling.
EMU40803
Flushing device
The flushing device is used to clean the cool-
ing water passages of the outboard motor
using a garden hose and tap water. For in-
structions on using the flushing device, see
page 75.
Bolt tightening torque:
42 N·m (4.28 kgf·m, 31.0 lb·ft)
1. Tilt support lever
A
B
ZMU08077
1
ZMU08078
1. Cowling lock lever
1. Cowling lock lever
1
ZMU08079
1
ZMU08080
©2019 Yamaha Motor Corporation, U.S.A.