C ONTENTS
FLIP-X
Maintenance Manual
T-1
Safety Instructions
1. Sa fety In for ma ti on S -1
2. Signal words used in this manual S-2
3. Warn in g la bel s S -3
3.1 Warning labels S-3
3.1.1 Warning label messages on robot and controller S-3
3.1.2 Supplied warning labels S-8
3.2 Warning symbols S-9
4. Important precautions for each stage of the robot life cycle S-10
4.1 Precautions for using robots and controllers S-10
4.2 Essential precautions for the linear conveyor module S-11
4.3 Design S-12
4.3.1 Precautions for robots S-12
4.3.2 Precautions for robot controllers S-12
4.4 Moving and installation S-13
4.4.1 Precautions for robots S-13
4.4.2 Precautions for robot controllers S-14
4.5 Safety measures S-16
4.5.1 Safety measures S-16
4.5.2 Installing a safety enclosure S-17
4.6 Operation S-18
4.6.1 Trial operation S-18
4.6.2 Automatic operation S-20
4.6.3 Precautions during operation S-20
4.7 Inspection and maintenance S-22
4.7.1 Before inspection and maintenance work S-22
4.7.2 Precautions during service work S-23
4.8 Disposal S-24
5. Emergency action when a person is caught by robot S-25
6. Cautionsregardingstrongmagneticelds S-25
7. Using the robot safely S-26
7.1 Movement range S-26
7.2 Robot protective functions S-27
7.3 Residual risk S-28
7.4 Special training for industrial robot operation S-28
7.5 KC mark S-29
FLIP-X_maint_E_V1.50.indb 1 18/05/15 15:00
To Next Page
Loading...
Need help?
General
