Need help?Do you have a question about the Yamaha GX-505 and is the answer not in the manual?
General| Type | Stereo System |
|---|---|
| Tuning range | FM, MW |
| Frequency response | 20Hz to 20kHz |
| Input sensitivity | 150mV (line) |
| Speaker load impedance | 8Ω to 16Ω |
Covers safe operation, installation, and general precautions for system use.
Details requirements for proper ventilation, placement, and avoiding hazards.
Details FCC regulations, modification warnings, and interference guidelines.
Explains proper grounding procedures for outdoor antennas in the US.
Provides instructions on setting up the system with adequate space for ventilation.
Lists and identifies components of the amplifier and tuner sections.
Lists and identifies components of the CD player section.
Lists and identifies components of the tape deck section.
Covers safe operation, installation, and general precautions for system use.
Details proper handling, maintenance, and care for discs and tape heads.
Addresses precautions for moving the unit, standby power, and electrical safety warnings.
Provides specific instructions on handling, cleaning, and storing discs to prevent damage.
Highlights key general capabilities like power output, timer, and sound expansion.
Details the capabilities of the 3-disc changer, programming, and playback options.
Outlines tape deck functions like synchronized recording, auto-reverse, and noise reduction.
Lists tuner capabilities including preset tuning options.
Instructions for installing batteries and understanding the remote's operation range.
Guides on connecting speakers and optional subwoofers to the main unit.
Details antenna connections and linking external audio devices.
Step-by-step guide to setting the system's clock time.
Instructions on how to modify the brightness of the system's display.
Explains the various indicators shown on the CD player's display.
Covers turning on the system, selecting CD source, basic play, pause, and stop.
Explains how to change disc play modes and select specific tracks.
Details skipping tracks, searching, and exchanging discs during playback.
Guides on programming tracks, canceling sequences, and checking program data.
Instructions for setting single track, disc, or full repeat playback modes.
Details how to enable and cancel random playback of tracks or discs.
Explains how to switch between different time displays for tracks and discs.
Explains the indicators related to radio tuning and station reception.
Guides on using automatic tuning search and manual frequency adjustment.
Covers automatic preset tuning, recalling stored stations, and memory backup.
Details how to manually store and recall preset radio stations.
Explains indicators related to tape playback, such as counter and Dolby NR status.
Details Dolby B noise reduction and using the tape counter for locating selections.
Covers loading tapes, starting playback, stopping, and removing tapes.
Instructions for winding tape, searching for selections, and listening to specific parts.
Guides on selecting sources, loading tapes, and initiating basic recording.
Explains how to change discs/tracks during CD recording and pause recording.
Details using the EDIT function for recording entire CDs, including side A/B splitting.
Describes the Auto-EDIT feature for optimizing tape space during CD recording.
Instructions for manually programming tracks for recording on both tape sides.
How to connect and listen to audio from external devices via AUX/MD.
Guides on recording audio from the system to external devices like MD recorders.
Covers volume control, bass boost, bass/treble, and YMERSION sound enhancement.
Instructions for using headphones and applying preset graphic equalizer effects.
Step-by-step guide to setting the system to turn on and play a source at a specific time.
Instructions for setting timer recording and using the sleep timer function.
To Next Page
