Do you have a question about the Yamaha MCR-040DG and is the answer not in the manual?
Frequency Response | 50 Hz-20 kHz |
---|---|
Disc Types Supported | CD, CD-R, CD-RW |
USB Direct Playback | Yes |
Radio Data System (RDS) | Yes |
Apple Docking | Yes |
Audio Formats Supported | MP3, WMA |
Playback MP3 | Yes |
Playback WMA | Yes |
Equalizer | Yes |
Power Consumption (Standby) | 0.5 W |
Impedance | 6 ohms |
Type | Mini System |
Radio | Yes |
Preset Stations Quantity | 30 FM |
iPod Compatibility | iPod |
Power Source | AC |
Amplifier Output Power | 30 W + 30 W (6 ohms, 1 kHz, 10% THD) |
Explains safety symbols like lightning flash and exclamation point used in the manual.
Instructions to record the unit's serial number for future reference.
Warning against unauthorized modifications affecting FCC compliance.
Importance of using high-quality shielded cables for connections.
Potential interference and corrective measures for RF energy.
Compliance with FCC/IC radiation exposure limits for uncontrolled equipment.
Placement advice for cool, dry, clean areas, away from heat/moisture.
Warnings about power connection, voltage, and cord handling.
Precautions regarding the laser component and avoiding direct eye exposure.
Specific safety advice for customers in Canada.
Explanation of symbols and notes used for clarity in the manual.
Describes Yamaha's Active Servo Technology for enhanced bass.
Explains Yamaha's digital wireless technology for music transfer.
Lists and illustrates components for the MCR-040 system.
Lists and illustrates components for the MCR-140 system.
Information on remote control operation range and sensor.
Instructions for changing the battery in the remote control.
Lists compatible CD types: CD, CD-R, CD-RW, CD-TEXT.
Details MP3 and WMA file formats, bitrates, and sampling frequencies.
How to play small 8cm CDs on the unit.
Advice to prevent unit malfunctions from disc condition or shape.
Step-by-step guide for connecting speakers and the FM antenna.
Instructions for wireless iPod connection and operation with MCR-140.
Details on stationing and charging iPods via dock or cradle.
How to connect and use USB mass storage devices.
Guide for establishing wireless connection to an optional subwoofer.
Detailed explanation of each button on the remote control and its function.
Description of indicators on the front panel display and their meanings.
Details on the unit's automatic standby mode to reduce power consumption.
Illustration and explanation of MCR-040 controls and ports.
Illustration and explanation of MCR-140 controls and charging cradle.
Steps to select and play music from an iPod.
Steps to select and play music from a CD.
Steps to select and play music from a USB device.
How to skip, fast forward, rewind, play, pause, and stop playback.
How to enable random playback for iPod, CD, or USB.
How to enable repeat playback for iPod, CD, or USB.
Methods for tuning FM stations: automatic and manual.
How to store and recall favorite FM stations using presets.
Configurable settings including preset delete, dimmer, and tone controls.
How to change brightness, treble, bass, balance, and power saving modes.
Instructions for setting the internal clock for timekeeping.
How to set the timer for playback or automatic standby.
Detailed steps for setting and activating the timer for music playback.
How to set the sleep timer for automatic standby after a specified period.
Solutions for unit not turning on or entering standby mode.
Common problems like no sound, mute, low volume, incompatible sources.
Reasons for unexpected unit shutdown, including timer or standby functions.
Troubleshooting for sound only coming from one speaker.
Issues with noisy stereo reception, tuning, and signal distortion.
Explains messages related to iPod connection, recognition, and compatibility.
Interprets MCR-140 status messages for wireless connections and iPod status.
Explains the meaning of LED lights on the transmitter for status indication.
Solutions for no sound when using an iPod, covering connection and status.
Issues controlling iPod via unit/remote, volume, or display updates.
Reasons for unit/iPod not responding to remote or front panel controls.
Problems with sound transmission, including interference and group settings.
Issues with the unit not recognizing USB devices or playing files.
Issues like no sound, distortion, no disc, or playback failure.
Reasons for remote control malfunctions, including range, lighting, and battery.
Guidelines for cleaning, storing, and writing on discs to prevent damage.
Technical details for the CD receivers, including power and dimensions.
Technical details for the NS-BP80 speakers, including driver and dimensions.
Technical details for the YIT-W11TX transmitter, including frequency and range.
Information on supported iPod models and Apple's role.