EasyManua.ls Logo

Yamaha Morphous CP250W - Speed Control and Braking

Yamaha Morphous CP250W
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION AND IMPORTANT RIDING POINTS
5
Starting off
NOTE:
_
EAU16760 EAU16780
Acceleration and deceleration Braking
1.
Close the throttle completely.
EAU16791
Before starting off, allow the engine to
warm up.
2.
Apply both front and rear brakes
simultaneously while gradually in-
creasing the pressure.
1.
While pulling the rear brake lever
with your left hand and holding the
grab bar with your right hand, push
the scooter off the centerstand.
1.
Grab bar
2.
Sit astride the seat, and then ad-
just the rear view mirrors.
3. Switch the turn signal on.
4.
Check for oncoming traffic, and
then slowly turn the throttle grip (on
the right) in order to take off.
5. Switch the turn signal off.
Front
The speed can be adjusted by opening
and closing the throttle. To increase the
speed,
turn the throttle grip in direction
(a).
To reduce the speed, turn the throt-
tle grip in direction (b).
5-2

Table of Contents

Related product manuals