Yamaha MOX8 Reference Manual

PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILEVOICE
MOX6/MOX8 Reference Manual
Pattern Mode
Pattern Play
[F1] PLAY
[F2] GROOVE
[F3] TRACK
[F4] PATCH
[F5] REMIX
[F6] CHAIN
Pattern Record
Pattern Record Standby
[F1] SETUP
[F2] VOICE
[F3] ARP ED
[F5] CLICK
During Pattern Recording
[F1] SETUP
[F3] RESET
[F4] TIE
[F5] DELETE
[F6] BAK DEL
Pattern Edit
[F1] CHANGE
[F2] VIEW FLT
[F5] INSERT
[F6] DELETE
Pattern Job
[F1] UNDO/REDO
[F2] NOTE
[F3] EVENT
[F4] PHRASE
[F5] TRACK
[F6] PATTERN
Supplementary Information
112
Supplementary Information
 Pattern Playback Types
When the Keyboard Start function is set to on, Pattern playback begins as soon as you press a key on the keyboard.
Move the cursor to the Keyboard Start icon then press the [INC] button in the PLAY display of the Pattern Play to enable
Keyboard Start. In this status, press any key to start Pattern playback.
To change Sections during playback, press the [PATTERN SECTION] button (the lamp lights), then use the Number [1]
– [16] buttons. When selecting a different Section during Pattern playback, “NT” and the next Section name appear in
the Section column at the top of the display. After the current Section reaches the timing specified in “PtnQuantize”
(page 145) in the [F2] SEQ display of the Utility mode, the next Section starts. If you record rhythm patterns such as
intro, melody A, fill-in, main theme, and ending to each of the Sections, you can play an entire Song by selecting the
appropriate Sections during playback.
The Pattern Chain function lets you program Sections in your own custom order, and have them change automatically
during playback to create a seamless sequence of backing parts and accompaniment for your live performance or
recorded Song. The Chain Play display (page 103) is the “portal” for entering the Pattern Chain function and lets you
play back the programmed Pattern Chain. Press the [F6] CHAIN button from Pattern Play to go to the Pattern Chain Play
display. Pattern Chains can be created from the Chain Record display (page 103) and the Insert function (page 104) in
the Chain Edit display. Pattern Chains can be edited in the Chain Edit display (page 104).
Starting playback by pressing a note
Changing the Section during playback
Pattern Chain Playback
Keyboard Start
Current Section or Next Section is indicated here.

Yamaha MOX8 Specifications

General

Polyphony	64 notes
Arpeggiator	6, 720 types
Display	240 x 64 dot LCD
Sound Engine	AWM2
Multitimbral Capacity	16 parts
Wave ROM	355MB (when converted to 16-bit linear format)
Keyboard	88-key, Graded Hammer Standard (GHS) keyboard
Effects	Reverb, Chorus, Insertion Effects, Master Effects, EQ
Sequencer	16-track
Connectivity	USB, MIDI In/Out, Phones, Output L/Mono, R, Foot Controller, Footswitch, Damper
Dimensions	1, 320 x 405 x 168 mm