EasyManuals Logo

Yamaha MOX8 Reference Manual

Yamaha MOX8
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOX6/MOX8 Reference Manual
Quick Setup
[F1] SETUP
[F2] AUDIO
[F3] MIDI
151
Quick Setup
Using Quick Setup can instantly call up appropriate sequencer-related panel settings by selecting convenient preset
setups, allowing you to simultaneously and instantly set a variety of important sequencer-related parameters.
This display determines the six Quick Setup settings. This display consists of two pages. Three Quick Setup settings are
shown in each page. Use the cursor [u]/[d] buttons to switch between the pages. After completing the settings as
desired, select the particular Quick Setup you want to use and then press the [ENTER] button to execute the setup.
NOTE
Holding the [QUICK SETUP] button and pressing the appropriate [A] (1) – [F] (6) buttons can also execute the corresponding
Quick Setup.
1 NAME
Determines the name for each Quick Setup.
2 AUDIO
Selects the audio setting for each Quick Setup. Each audio setting (“Config1” – “Config6”) can be edited in the [F2]
AUDIO display.
Settings: Config1 – Config6
3 MIDI
Selects the MIDI setting for each Quick Setup. Each MIDI setting (“Config1” – “Config6”) can be edited in the [F3] MIDI
display.
Settings: Config1 – Config6
The default settings for Quick Setups 1 – 6 are as follows.
Quick Setup 1 (DAW Rec)
“Audio” = ”Config2”
Use this setting when recording the signals from the tone generator and the A/D INPUT [L]/[R] jacks separately
to DAW software, and playing the signals from the OUTPUT [L/MONO]/[R] jacks directly.
“MIDI”=”Config1”
Use this setting when recording this instrument’s performance (not including Arpeggio data) to the DAW
software.
Quick Setup 2 (Arp Rec)
“Audio”=”Config2”
This setting is same as the Quick Setup 1.
“MIDI”=”Config2”
Use this setting when recording this instrument’s performance including Arpeggio data to the DAW software.
Keep in mind that this is for recording Arpeggios for which “KeyMode” is set to “sort” or “thru.”
Operation
Press the [QUICK SETUP] button.
[F1] SETUP
Mode DirectMonitorSw A/D In DirectMonitorSw Part
2StereoRec on on
LocalCtrl MIDI Sync ClockOut ArpOutSw KBDTransCh TrIntSw TrExtSw
off auto off all off 1 all on all on
LocalCtrl MIDI Sync ClockOut ArpOutSw KBDTransCh TrIntSw TrExtSw
on auto off all on off all on all off

Other manuals for Yamaha MOX8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha MOX8 and is the answer not in the manual?

Yamaha MOX8 Specifications

General IconGeneral
Polyphony64 notes
Arpeggiator6, 720 types
Display240 x 64 dot LCD
Sound EngineAWM2
Multitimbral Capacity16 parts
Wave ROM355MB (when converted to 16-bit linear format)
Keyboard88-key, Graded Hammer Standard (GHS) keyboard
EffectsReverb, Chorus, Insertion Effects, Master Effects, EQ
Sequencer16-track
ConnectivityUSB, MIDI In/Out, Phones, Output L/Mono, R, Foot Controller, Footswitch, Damper
Dimensions1, 320 x 405 x 168 mm

Related product manuals