To Next PageTo Next Page
Need help?Do you have a question about the Yamaha MSR100 and is the answer not in the manual?
General| Tweeter | Yes |
|---|---|
| Speaker type | 2-way |
| Number of drivers | 1 |
| Speaker placement | Floor |
| Audio output channels | 1.0 channels |
| Woofer diameter (imperial) | 8 \ |
| Subwoofer driver diameter (imperial) | 1 \ |
| Product color | Black |
| LED indicators | Power |
| Housing material | Polypropylene (PP) |
| Recommended usage | Speaker set unit |
| Impedance | 6 Ω |
| Frequency range | 55 - 20000 Hz |
| RMS rated power | 100 W |
| Crossover frequency | 4000 Hz |
| Total Harmonic Distortion (THD) | 1 % |
| Microphone sensitivity | -50 dB |
| Connectivity technology | Wired |
| Power consumption (typical) | 70 W |
Weight and Dimensions| Depth | 255 mm |
|---|---|
| Width | 275 mm |
| Height | 455.5 mm |
| Weight | 11000 g |
Information on manual usage, authorization, safety warnings for static, chemicals, and earthing.
Technical details of speaker and amplifier units including performance, dimensions, and controls.
Speaker frequency response graph and rear panel layout description.
Diagrams showing the layout of internal circuit boards from different views.
Diagram illustrating signal flow and level changes throughout the audio path.
Procedures for removing the front grille and the LF speaker unit.
Steps to separate speaker cabinets and remove the HF speaker.
Procedures for removing internal components like HF speaker, network, and separating cabinets.
Procedures for removing amplifier, EQ, and IN PCB assemblies.
Steps to remove the power amplifier circuit board.
Procedures for removing the power transformer and power switch assemblies.
IC block diagram and layout diagrams for AC and Power Switch circuit boards.
Layout diagrams for the Power Amplifier and EQ circuit boards.
Layout diagrams for the IN and Network circuit boards.
Test conditions, environmental requirements, and detailed inspection items with criteria.
Block diagrams illustrating signal flow for Input, EQ, Power Amplifier, and Network stages.
Detailed circuit diagrams for AC, Network, Power Transformer, and Power Switch sections.
Detailed schematic diagram of the Equalizer (EQ) circuit.
Detailed schematic diagram of the Input (IN) circuit.
Introduction to the parts list, abbreviations, warnings, and mechanical parts.
Exploded view illustrating the assembly of the speaker unit.
Exploded view and list of mechanical parts for the amplifier assembly.
List of circuit boards, connectors, fuse holders, and wires with part numbers.
List of carbon, flame proof, and variable resistors with values and part numbers.
Lists various types of capacitors, diodes, ICs, and transistors with specifications and part numbers.
Lists coils, connectors, diodes, and capacitors with specifications and part numbers.
Lists transistors, resistors, relays, and thermistors with specifications and part numbers.
Lists fuses, power switches, speakers, and power transformers with part numbers.
