EasyManua.ls Logo

Yamaha MTN690-U - Main switch;steering lock

Yamaha MTN690-U
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EAU10474
Ma
in switch/steering lock
ON
OFF
LOCK
The main s
witch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
TIP
Be sure t
o use the standard key (black
bow) for regular use of the vehicle. To
minimize the risk of losing the code re-
registering key (red bow), keep it in a
safe place and only use it for code re-
registering.
EAU84035
ON
A
ll electrical circuits are supplied with
power and the vehicle lights are turned
on. The engine can be started. The key
cannot be removed.
TIP
l The h
eadlight(s) will turn on when
the engine is started.
l To prevent battery drain, do not
leave the key in the “ON” position
without the engine running.
EAU10664
OF
F
All electrical systems are off. The key
can be removed.
EWA10062
WARNING
Never turn t
he key to “OFF” or
“LOCK” while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.
EAU73803
LO
CK
The steering is locked and all electrical
systems are off. The key can be re-
moved.
To lock the steering
1. Push.
2. Turn.
1. Turn the h
andlebars all the way to
the left.
2. With the key in the “OFF” position,
push the key in and turn it to
“LOCK”.
3. Remove the key.
TIP
If the s
teering will not lock, try turning
the handlebars back to the right slight-
ly.
Instrument and control functions
4-2
4

Table of Contents