What to do if the recall could not be executed because the preset to be recalled when the MTX starts up was not found on Yamaha Computer Hardware?
Specify a preset that exists. No sound will be output unless an appropriate preset is recalled.
What to do if the SD memory card was not recognized on Yamaha Computer Hardware?
Use an SD memory card that complies with the specifications.
What to do if a preset recall attempt has failed on Yamaha MTX3 Computer Hardware?
Initialize the memory of the device (use rear panel DIP switches 7 and 8). If this does not solve the problem, contact your Yamaha dealer.
What to do if synchronization has not been completed on Yamaha MTX3 Computer Hardware?
Perform synchronization again using MTX Editor. If this does not solve the problem, initialize the memory of the device and synchronize again. If this also fails, contact your Yamaha dealer.
What to do if unable to play the specified file or folder in the SD player on Yamaha Computer Hardware?
Verify that the specified audio file or folder exists in the SD memory card. There must be at least one playable audio file in the specified folder.
What to do if the UNIT ID settings when synchronization was performed do not match the current UNIT ID settings on Yamaha MTX3?
Do not change any UNIT ID’s after performing synchronization. If you’ve changed any UNIT ID’s, perform synchronization again.
What happens if the internal backup battery has been completely exhausted or is not installed on Yamaha MTX3?
When you turn off the power, the current settings will be lost, and will return to the default values. Please stop use immediately, and contact your Yamaha dealer.
Important information regarding battery usage, replacement, and safe disposal practices.
Essential safety guidelines covering electrical hazards, location, handling, and maintenance.
Overview of the MTX3's capabilities, including its processor, YDIF format, and control options.
Detailed explanation of the MTX3's front panel controls, displays, and indicators.
Description of all connectors and switches located on the rear panel of the MTX3.
Procedures for physically installing the MTX3 and connecting analog and digital audio sources.
A guide to diagnosing and resolving common operational problems with the MTX3.
A list of alert codes displayed on the MTX3 and corresponding actions to take.
Explains warning symbols and provides comprehensive safety instructions for using the apparatus.
General| Sample rate | 48 kHz |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Channels quantity | 21 channels |
| Signal delay (@48kHz) | 2.5 ms |
| Supported sample rates | 44.1, 48 kHz |
| Output impedance | 75 Ω |
| Total Harmonic Distortion (THD) | 0.05 % |
| Phantom power | 48 V |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 50 W |
| Product color | Gray |
| Rack capacity | 1U |
| Rack mounting | Yes |
| Video capability | No |
| Nominal input level | -62 dBu |
| Cables included | AC |
| Number of Euroblock input connectors | 4 |
Weight and Dimensions| Depth | 362 mm |
|---|---|
| Width | 480 mm |
| Height | 44 mm |
| Weight | 4800 g |
To Next Page
