To Next PageTo Next PageWhy is there no sound coming from my Yamaha Home Cinema speakers?
If there's no sound, ensure the speaker cables are securely connected. Also, check that the VOLUME control isn't set to 0; if it is, turn the VOLUME control to the right to increase the sound.
What to do if my Yamaha NS-P430 Home Cinema speakers have no power?
If your Yamaha Home Cinema speakers aren't powering on, even with the STANDBY/ON button in the ON position, check that the power plug is securely connected. Also, verify that the POWER switch is set to the ON position.
Why do my Yamaha NS-P430 have no sound?
If your Yamaha Home Cinema speakers aren't producing sound, make sure the speaker cables are securely connected. Also, check that the VOLUME control isn't set to 0; if it is, turn it to the right.
Why is the sound level too low on my Yamaha NS-P430?
If the sound level from your Yamaha Home Cinema speakers is too low, it might be that the speaker cables are not connected correctly. Connect them correctly, ensuring L (left) goes to L, R (right) goes to R, “+” goes to “+” and “–” goes to “–.”
Why won't my Yamaha Home Cinema subwoofer turn on automatically?
If your Yamaha Home Cinema subwoofer isn't turning on automatically, check the following: 1. Ensure the POWER switch is set to the ON position. 2. Make sure the STANDBY/ON button is set to the ON position. 3. Verify the AUTO STANDBY switch is set to the “HIGH” or “LOW” position. 4. If the level of input signal is too low, set the AUTO STANDBY switch to the “HIGH” position.
What to do if my Yamaha Home Cinema subwoofer turns on unexpectedly?
If your Yamaha Home Cinema subwoofer turns on unexpectedly, it could be due to noise from external appliances. Try moving the subwoofer farther away from such appliances and/or repositioning the connected speaker cables. Alternatively, set the AUTO STANDBY switch to the “OFF” position.
Why does my Yamaha Home Cinema subwoofer turn into standby mode unexpectedly?
If your Yamaha Home Cinema subwoofer is unexpectedly entering standby mode, it might be because the level of input signal is too low. Try setting the AUTO STANDBY switch to the “HIGH” position.
Why isn't power supplied to my Yamaha NS-P430?
If your Yamaha Home Cinema speakers aren't receiving power, even when the STANDBY/ON button is in the ON position, ensure the power plug is securely connected. Also, check that the POWER switch is set to the ON position.
General| Impedance | 6 Ohms |
|---|---|
| Nominal Input Power | 30 W |
| Maximum Input Power | 100 W |
| Magnet Shielding | Yes |
| Type | Home Cinema speakers |
| Configuration | 5.1 |
| Center Speaker | 1 |
| Subwoofer | 1 |
| Power Handling (Satellite and Center) | 30W |
| Power Handling (Subwoofer) | 100W |
| Subwoofer Driver | 16cm cone |
