Yamaha NX-E700 - Page 19

19
DRX-730/NX-E700
DRX-730/NX-E700
Fig. 3
Click to open the window
6. Click [E.P.R.], the screen appears as shown below. (Fig. 4)
Click [OK] to start writing. (Fig. 4)
Writing being executed.
Fig. 4
5. Click [Refer...]. And select the firmware name. (Fig. 3)
* The ID code and MCU type are loaded automatically when the file is selected. (Fig. 3)
Click [OK]. (Fig. 3)