Need help?Do you have a question about the Yamaha P2075 and is the answer not in the manual?
General| Damping Factor | 200 |
|---|---|
| Total Harmonic Distortion | 0.05% |
| Frequency Response | 20Hz - 20kHz |
| Input Sensitivity | 0.775V |
| Dimensions | 480 x 88 x 385 mm |
| Power Output (8 ohms) | 75W per channel |
Details the front panel layout including input attenuators, signal indicators, and power switch.
Describes the rear panel input connectors (XLR, phone jack) and the MONO/STEREO mode switch.
Step-by-step guide for setting up and operating the amplifier for optimal sound system performance.
Explains XLR and phone jack input configurations, including balanced, unbalanced, and daisy-chaining.
Illustrates standard stereo mode connections to speakers via binding posts and phone jacks.
Diagram and instructions for connecting speakers in bridged mono configuration for increased power.
Provides a general approach to optimizing signal levels throughout the sound system.
Guidance on choosing appropriate headroom values for different audio applications and program material.
Instructions on how to safely obtain a ground connection from 2-wire AC outlets using an adapter.
Compares power calculations for stereo mode versus bridged mono mode, explaining the voltage and impedance relationship.
Describes the amplifier's output relay for protecting speakers from turn-on transients and DC offset.
Lists detailed electrical and performance specifications for the P2075 amplifier.
To Next Page
