Need help?Do you have a question about the Yamaha P2350 and is the answer not in the manual?
General| Frequency Response | 10Hz - 50kHz (+0dB, -3dB) |
|---|---|
| Total Harmonic Distortion | Less than 0.1% (20Hz - 20kHz) |
| Damping Factor | 200 (1kHz, 8 ohms) |
| Input Sensitivity | 0dB (0.775V) |
| Signal to Noise Ratio | 100dB |
| Dimensions | 480 x 132.6 x 354.4mm (18-7/8" x 5-1/4" x 13-15/16") |
| Weight | 16kg (35.3 lbs) |
| Power Output (Bridged) | 700W into 8 ohms |
| Input Impedance | 10k ohms |
| Cooling | Forced air |
Advises on avoiding heat, humidity, dust, vibration, physical shocks, and careful cable handling.
Warns against unauthorized repairs and emphasizes turning power off before connections.
Explains protection, signal, clip indicators, input attenuators, power switch, and knob locks.
Details XLR/TRS inputs, speaker terminals, and the stereo/monaural mode switch.
Guides on converting the amplifier to a BTL monaural unit and its connection.
Covers permanent installation, ventilation, spacing, rack placement, and heat considerations.
Details required airflow and specifications for cooling fans.
Describes the optional ventilation panel accessory.
Outlines rules for mounting in portable racks and cases.
Covers positioning for airflow and using rear support screws.
Instructions for preparing speaker cables and connecting them to terminals.
Advises on matching speaker power handling and using in-line fuses.
Information on Yamaha's service network and dealer support.
To Next Page
