Need help?Do you have a question about the Yamaha PC2602 and is the answer not in the manual?
Explains the adaptation for monaural operation via the rear-panel MODE switch and specific terminal connections.
Details the front panel layout, including power, thermal, protection indicators, peak meters, signal, and clip indicators.
Describes rear panel elements like speaker outputs, ground switch, input connectors (XLR, phone), and the mode selector switch.
Details how to set the amplifier to MONO mode for monaural operation and the corresponding speaker connections.
Lists power output levels (stereo/mono, 8/4 ohms) and frequency response specifications.
Details total harmonic and intermodulation distortion, input sensitivity, and impedance.
Specifies damping factor, slew rate, and channel separation.
Lists front panel indicators (LEDs, meters) and control functions like power and attenuators.
Explains harmonic distortion, T.H.D., and clipping distortion, and their impact on audio quality.
Details the amplifier's multiple protection circuits and thermal management features.
Details rack mounting procedures, airflow needs, and the necessity of cooling fans.
Step-by-step guide for removing, washing, and drying the cooling fan filter element.
Illustrates the internal signal path, including input stages, amplification, clipping detection, and protection.
To Next Page
General
